Takahashi EM-200 Temma 2Z Equatorial Mount - High Latitude w/5kg c/w x2
Article number: | TTM44010 |
Availability: | More on the Way to us |
Delivery time: | More on the Way to us |
The Takahashi EM-200 Temma 2Z mount is a highly accurate, superbly crafted German equitorial mount suitable for loads up to 35.3 lbs. The mount features the Temma 2Z control system, allowing for PC GOTO funcionality as well as precise control using the supplied hand controller.
The EM-200 T2Z operates off 12 or 24 VDC and is capable of GOTO operation from a PC or Mac, with a high speed slew rate of 700X, and slower manual slew rates for R.A. and Dec. adjustments. The mount features a built in, illuminated polar finder scope for accurate polar alignment, facilitating accurate tracking and GOTO's. To further enhance tracking capability, the mount is autoguider capable. The mount comes equiped with manual scales for both right accension and declination, graduated at 10 minutes and 2 degrees, respectively. Two 11 lb counterweights are included.
The EM-200 T2Z comes in two models, depending on the desired observation latitude. The LL model is suitable for latitudes between 0 and 20 degrees. The ML model is suitable for latitudes between 0 and 50 degrees. The HL model is suitable for latitudes between 22 and 63 degrees.
Takahashi EM-200 Temma II Mount Specifications
- Type German Equatorial Mount
- R.A. Slow-Motion Motor driven
- DEC. Slow-Motion Motor driven
- Azimuth Adjustment ± 15°
- Elevation °
- Polar Finder / Accuracy - Built-in / 2' - 4.45 degrees
- R.A. Setting Circles Accuracy 10 arcminutes
- DEC. Setting Circles Accuracy 2°
- Encoders Included
- Weight (without counterweights) 15 kg
- Counterweights 2 x 5kg
- Maximal Loading Capacity 18 kg (without counterweights)
- Optimal Loading Capacity 15 kg (without counterweights)
- Operating Voltage 12V / 24V DC - 12v DC only for high speed operation
- Power Consumption NC
- Tube Mounting 2 x M8 screws (35mm)
- Mounting Capacities Tube rings, plates and dovetail mounting plates,
- R.A. axis diameter. (material) 40 mm (bronze)
- R.A. worm gear shaft diameter (material) 18 mm (iron)
- R.A. gear diameter (material) 92 mm/180 teeth (bronze)
- DEC. axis diameter (material) 40 mm (iron)
- DEC. worm gear shaft diameter (material) 18 mm (brass)
- DEC. gear diameter (material) 92 mm/180 teeth
- Stepper Motors Accuracy 50 PPS
- Slow motion speeds 0,1x to 1,9x sidereal rate
- High speed mode 700x sidereal rate
- Worm gear shaft cycle 8 minutes
- Tracking accuracy ± 5"
- Autoguiding SBIG ST-4/7 compatible