Losmandy G11G Configurable Equatorial Mount Only (Choose Configuration) - G11G-B

• The Losmandy G-11 Equatorial Mount has a 60 lb weight capacity
• Laser engraved latitude scales and setting circles
• The Losmandy G11 weighs 92 lb including the 21 lb counterweight
• 0-68º latitude range
• Ships with OPW one-piece worm block on both axes
• Comes with tucked motors for a streamlined look and easier transport
• Spring-loaded worm added to the RA and DEC axis
• Thie G11G includes the Gemini II GoTo System
• This version of the Losmandy G-11 includes the FHD Heavy-Duty Tripod
• The FHD weighs 35 lb

   

• All machined aluminum and stainless steel, black anodized
• All hardware used is stainless steel
• One 3.750" diameter needle thrust bearing
• One 2.000" diameter needle thrust bearing
• Two 1.500" diameter needle bearings
• 5.625" diameter, 7075 aluminum worm gear, 360 teeth
• Dual supported, ball bearing housed ground High Precision Brass Worm
• Variable slip clutch, both axes with one-knob tension design
• Fully locking, unique tangent arm design altitude adjustment, 14°-64°, large knob for easy alignment (8-68° possible, with small modification)
• Laser engraved latitude scale in 2° increments
• Single knob azimuth control, bi-directional ± 8.5°
• 5.0" diameter laser engraved setting circles, 4 minute R.A., vernier reading to 1 minute / 1° Dec., vernier reading to 0.1°, R.A. circle engraved for Northern and Southern Hemisphere
• Porter slip ring design
• DC Servos for imporved accuracy with higher torque than steppers
• Dovetail saddle-plate allows for the interchanging of any tube assembly; this reduces need for Dec weights
• Removable stainless steel weight shaft w/safety knob
• Includes one 21 lb counterweight
• 7 lb and 11 lb extra counterweights available as options
• Through-the-axis Polar Scope capability, works in Northern and Southern Hemisphere; Note: the Polar Scope is optional
• Instrument weight capacity: 60 lb
• Equatorial head weight: 36 lb

   

The Losmandy Gemini GoTo System is a servo motor based computerized positioning system for the Losmandy Mounts. Losmandy has updated the Gemini GoTo System to include a newly enhanced CPU and increased memory. Perhaps most impressive is the interactive color touch screen that comes with the Losmandy Gemini 2 Go-To System.

The Gemini 2 GoTo System is incredibly precise and the choice of astrophotographers worldwide. Precise object tracking is achieved as a result of the servo motor system Losmandy utilizes. The servo motor system runs with a continuous and smooth rotation, for better tracking. A spring-loaded worm has been added to the RA and DEC axis. Further, the Losmandy system has an elevated level of torque which allows it to produce slewing rates of up to 8° per second with the GM-8 mount, 6° per second with the G-11 and 5° per second with the Titan Mount. The Losmandy Gemini system is a great instrument for use in the field because it can be run as a stand-alone system. With a 40,000 object database and an illuminated Color LCD touch screen, this mount is a pleasure to use. Powering the unit is simple; all you need is a 3A, 12-18 Volt DC power supply. Check out our list of specifications and features pertaining to the Losmandy Gemini 2 Drive System:

• Full Color Graphic Touch Screen clearly displays all functions
• Classic four-button pattern for guiding, centering, moving, and slewing on both the touch screen and on a tactile membrane on the rear surface
• Support for the original four-button controller
• Can be used on all Losmandy GM8, G-11, & Titan mounts
• Custom mount support using the Programmable Gear Rate function
• 0.5 arcsec positional accuracy
• DC Servos for improved accuracy, with higher torque than stepper motors
• GPS-compatible with optional receiver
• Stand-alone system: No PC is required for operation
• English, German, French, & Spanish displays
• Ethernet 10/100 with full IP function permits operation from anywhere using a browser, ASCOM, or app over the web or serial port
• Non-Volatile Memory and Real-Time Clock
• Over 40,000 objects stored in the database
• USB ports: Virtual COM to PC, ASCOM or planetarium program
• Port F: multi-function serial port; for A/D Input or Output
• Firmware upgrade via internet
• PEC: Periodic error correction
• Auto-Guide port (TTL)
• Dual 12~18 VDC input/output (3.0 A)
• Tiltable control panel, for easy access during operation

   

• 168 BSL
• 303 Combined_Constellation_Stars
• 5437 IC
• 1125 LBN
• 1787 LDN
• 110 Messier Objects
• 8290 NGC (New General Catalog)
• 1143 PN
• 17636 SAO (Smithsonian Ap. Obs.)
• 313 Sh2
• 223 Southern_Constellation_Stars
• 3988 WDS

The CPU on the Gemini 2 System uses a mounted PC board as its base. This is a proven setup and is one of the most reliable in the field today. The main board has auto-guider and accessory ports, for full remote control (via the web) of the system from a computer from anywhere in the world. The Gemini 2 uses a Meade LX200 inspired command set. Clock and location information can be updated through a Losmandy GPS accessory that is sold separately.

• All machined aluminum, black anodized, powder coated
• Tripod height, adjustable from 33" - 48"
• Extremely sturdy and rigid when assembled, for superior astrophotography
• Removable leg design for easy transporting
• Tripod (only) weight: 35 lb