Pegasus Astro Aluminum 2020 CNC Enclosure for Ultimate Powerbox V2 - PEG-ENC-UPBv2
| Article number: | PEG-ENC-UPBv2 |
| Availability: | More on the Way to us |
| Delivery time: | More on the Way to Us |
This aluminum enclosure from Pegasus Astro is compatible with all Universal Powerbox v2 boards
The package includes the following items.1 x UPBv2 aluminum enclosure8 x M3x6mm Allen bolts4 x M3x14mm Philips screwsPegasus Ultimate Power Box v2 2020 enclosure installationStep 3Slide out the circuit board and place it on the new bottom part as shown in the photos below.Your older circuit board doesn’t have holes to secure it on the available threads of the bottom part of the enclosure. Therefore, there is a piece of foam glued so when you placed the circuit board, the pins of the Dew Heater sockets will make holes into it and will keep the board in place.old enclosureStep 2Untie the four (4) stock screws from one side of your old enclosure, displayed by the black arrows.1/2Step 1Untie the four (4) bottom screws from the new enclosure.Store the old enclosure and all of its screwsas you don’t need them anymore.