Baader Hyperion T-Adapter for Mark I & Mark II Clickstop Zooms
| Article number: | HTA54/T2 |
| Availability: | More on the Way to us |
| Delivery time: | More on the Way to us |
- The Hyperion T-Adapter was designed for use with the Baader Clickstop Zoom Eyepiece
- For projection photography, the Hyperion T-Adapter allows for an external T-Thread at the eyepiece level
- Using the Baader Hyperion T-Adapter in between the camera and eyepiece allows for desired magnification and projection
Note: This product will not fit the Mark III zoom without the addition of the HTA43-54 adapter.
For the Clickstop Zoom eyepiece, the Digital T-Adapter attaches to the M54 thread of the zoom which is located under the rubber eyeguard. For direct coupling of any T-threaded camera or accessory to the M43 thread of the Hyperion Eyepieces, look no further than the Baader Hyperion Digital T-Adapter.
Because of the external T-Thread (M42 x 0.75) right at the eyelens of the Hyperions, these adapters allow for Hyperions to be used with CCD and DSLR cameras which give classic eyepiece projection photography. For desired projection and magnification, Baader's Hyperion T-Adapter can be coupled with a Baader T-2 Extension tubes placed between the eyepiece and camera. This system is extremely rigid and compact because of the threaded direct-coupling.