Takahashi

$123.00

This Takahashi Rear 1.25" Anodized Embossed Plug is designed to protect and prevent dust from entering into the lens.

Takahashi Rear 1.25" Anodized Embossed Plug

$11.00

Takahashi Takahashi CCA-250 Extension Ring

The is a 92mm diameter male/female aux ring that is 32.5mm wide, and is used with the CCA-250 645 Reducer. It is Part # 16 on CCA-250 645 Reducer Chart, shown HERE.

Add to cart

Takahashi CCA-250 Extension Ring

$115.00

Takahashi Takahashi CCA-250 Visual Adapter

Takahashi Adapter TKP86005 from M54x0.75 to M43x0.75 (# 12).

Used on the FSQ-85ED, FSQ-106ED and CCA-250, but also on the FC-100DF and FC-100DL when the 0.66x Reducer also wants to be used visually.

On the eyepiece side Coupling S (TKP00103) or Coup

Add to cart

Takahashi CCA-250 Visual Adapter

$98.00

Takahashi Takahashi Eyepiece holder 31.75 n46 For FSQ-106ED, FS-60C / FS-60CSV / FS-60CB

Takahashi 31.8 mm Compression Ring eyepiece holder. This 1.25" Ocular Adapter from Takahashi is for 1.25" eyepieces and diagonals. It has a two-point compression ring and chrome set-screws for a firm hold on your diagonal or eyepiece.

Add to cart

Takahashi Eyepiece holder 31.75 n46 For FSQ-106ED, FS-60C / FS-60CSV / FS-60CB

$108.00

Takahashi Takahashi Reducer / Extender Auxiliary Ring for CCA-250

Takahashi's 98mm reducer attaches to either the ExtenderCR or ReducerCR to the CCA-250 Camera Angle Adjuster.

End 1: M98 x 1 female thread

End 2: M98 x 1 male thread and M72 x 1 female thread

Metal Back: 33 mm

Add to cart

Takahashi Reducer / Extender Auxiliary Ring for CCA-250

$135.00

Takahashi Takahashi 98mm RD Extension 20.1mm

Takahashi's 98mm Extension Auxiliary ring -20.1mm

Add to cart

Takahashi 98mm RD Extension 20.1mm

$101.00

Takahashi Takahashi TKA38206 Aux Ring TOA-130/FSQ-130ED .7X 645 Reducer

Auxilliary Ring "L" for Takahashi FSQ-130ED. This is #81L on the FSQ-130ED System Chart.

Add to cart

Takahashi TKA38206 Aux Ring TOA-130/FSQ-130ED .7X 645 Reducer

$141.00

Takahashi TAKAHASHI M98 S SPACER FOR EDX4 - 27.5MM LONG

This Takahashi AUX Ring S Spacer has M98 threads and is 27.5mm long

Add to cart

TAKAHASHI M98 S SPACER FOR EDX4 - 27.5MM LONG

$140.00

Takahashi Takahashi 645RD ADAPTER NON EDX

Takahashi M98 extension case, length: 38.5mm (light path)

M98x1 inner thread on M98x1 outer thread

Add to cart

Takahashi 645RD ADAPTER NON EDX

$133.00

Takahashi Takahashi Extension Tube No., 82 25MM for TOA130NF FTNR

This Takahashi 25mm Spacer, or Extension Tube 67F, was designed for the TOA-130NFB refractor and comes standard with the large format 67 Flattener. It is #82 on the System Chart and connects to the 67 Flattener on the scope side and the Coupling TW (TKP31

Add to cart

Takahashi Extension Tube No., 82 25MM for TOA130NF FTNR

$167.00

Takahashi Takahashi 92mm Threaded 58mm Prime Focus Ring(106ED)

This Takahashi Prime Focus Ring is designed for theTakahashi FSQ106ED F5 Astrograph Telescope.

Add to cart

Takahashi 92mm Threaded 58mm Prime Focus Ring(106ED)

$113.00

Takahashi RD Extension M-300

Add to cart

Takahashi RD Extension M-300

$126.00

Takahashi Takahashi Vari-Ring for TOA130R

The Takahashi vari-ring for the TOA-130 reducer is used to vary the reduction provided by the reducer on the TOA-series of telescopes.

End 1: M72 x 1 male thread

End 2: M72 x 1 female thread

Metal Back: 17 mm

Add to cart

Takahashi Vari-Ring for TOA130R

$66.00

Takahashi Takahashi 4-Turret Eyepiece Holder Easy View - 1.25

Takahashi has just introduced a high quality 90° 4-turret eyepiece holder. The 90° design allows the observer to conveniently view through any if the selected eyepiece in the turret. The nosepiece is a 2" adapter to allow a secure attachment of the turret

Add to cart

Takahashi 4-Turret Eyepiece Holder Easy View - 1.25

$640.00

Takahashi TJL0178 STX Adapter Bolt Circle

Add to cart

Takahashi TJL0178 STX Adapter Bolt Circle

$190.00

2" compression ring extension tube. Excluding the barrel, 2.9" in length.

Add to cart

Takahashi 2" Extension Tube L

$194.00

Takahashi Takahashi MEF-4 - 7-1 Micro Edge for 4" Focusers

Takahashi's MEF-4 MicroEdge focuser, works with a wide variety of telescopes with 4" focusers.

This device works with he following¬†Takahashi telescope models:

Takahashi TOA-150
Takahashi TOA-130NFB
Takahashi FS-128F
Tak

Add to cart

Takahashi MEF-4 - 7-1 Micro Edge for 4" Focusers

$292.00

Takahashi Takahashi TET0018 18mm CCD Extension Tube for FS-60C

TET0018 18mm CCD Extension Tube for FS-60C wide mount output for TCD0001 CCD adapter.

Add to cart

Takahashi TET0018 18mm CCD Extension Tube for FS-60C

$120.00

Takahashi Takahashi SD Ring for 76D Flattener

This flattener allows is needed when using the 76D flattener on a Takahashi telescope for terrestrial viewing. It adjusts the position of the flattener relative to the focuser draw tube to allow for the telescope to have a closer focus point.

Add to cart

Takahashi SD Ring for 76D Flattener

$86.00

Takahashi Takahashi MEF-3 - 7:1 Micro Edge Focuser for ALL Takahashi Telescopes

Takahashi's MEF-3 7:1 MicroEdge Focuser is compatible with 2.7" Takahashi telescopes focusers.

Compatible with following Takahashi Telescope focusers:

2.7"

2,6"

2"

as well as the

Add to cart

Takahashi MEF-3 - 7:1 Micro Edge Focuser for ALL Takahashi Telescopes

$349.00

Designed for 1.25" focusers, the Takahashi 2x Barlow Extender delivers a 2X magnification factor.

Add to cart

Takahashi 2X Barlow - 1.25

$166.00

Takahashi Takahashi TOA-130 25mm Spacer Ring for 67 Flattener

This Takahashi 25mm Spacer, or Extension Tube 67F, was designed for the TOA-130NFB refractor and comes standard with the large format 67 Flattener. It is #82 on the System Chart and connects to the 67 Flattener on the scope side and the Coupling TW (TKP31

Add to cart

Takahashi TOA-130 25mm Spacer Ring for 67 Flattener

$55.00

Takahashi Takahashi Coupling #10 for Sky 90 TAD0090

SKY 90 COUPLING #10 (DT)

Add to cart

Takahashi Coupling #10 for Sky 90 TAD0090

$97.00